You are here: Home / Products / Batteries / Outback Power

Outback Power


EnergyCell RE

Outback Energy Cell

The EnergyCell RE valve regulated lead acid battery is designed for high power density and renewable energy cycling applications. Absorbed Glass Matt (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance. The EnergyCell RE also features low profile terminals with threaded copper alloy inserts providing reduced maintenance and increased safety.

The OutBack EnergyCell batteries feature:

  • Front terminal access design for ease of maintenance and installation
  • High-density pasted plates for high cycle life
  • Lead-calcium-tin alloy plates for long life in both cycling and float applications
  • High recharge efficiency
  • Compact footprint for higher energy density requirements
  • Thermally welded case-to-cover bond to eliminate leakage
  • UL-recognized component
 

  EnergyCell 170RE EnergyCell 200RE
Cells Per Unit 6 6
Voltage Per unit 12 VDC 12 VDC

Operating Temperature Range
(with Temp Comp)

 Discharge: -40°F (-40°C) to +160°F (71°C) Charge: -10°F (-23°C) to +140°F (60°C)
Optimal Operating Temperature Range +74°F (23°C) to +80°F (27°C)
Recommended Max Charging
Current Limit Per String		 25 ADC 30 ADC
Float Charging Voltage 13.62 to 13.8 VDC / unit average at 77°F (25°C)
Equalization and Cycle
Service Charging Limits		 14.4 to 14.8 VDC / unit average at 77°F (25°C)
Self Discharge Battery can be stored up to 6 months at 77°F (25°C) before a refreshing charge is required. Batteries stroed at temperatures greater than 77°F (25°C) will require recharge sooner than batteries stored at lower temperatures.
Temperature Comp. Factor
(Charging)		 5mV per degree C per cell (2V)
Terminal Threaded copper alloy insert terminal to accept 1/4-20 UNC bolt
Terminal Hardware Initial Torque 110 in-lbs (12.4 Nm)
Weight (lbs. / kg) 115 lbs (52 kg) 131 lbs (60 kg)
Dimensions H x D x W (in /cm)* 11.14 x 22.01 x 4.95" (28.3 x 55.9 x 12.6 cm) 12.60 x 22.01 x 4.95" (32.0 x 55.09 x 12.6 cm)
*Batteries to be installed 0.5" (12.7 mm) spacing minimum and free air ventilation.

PDF Outback EnergyCell RE Specs

Intended for use with the Outback Power Integrated Battery Rack.

PDF Outback Integrated Battery RackSpecs